中文版中文版FeedbackFeedbackAdd to FavoritesAdd to FavoritesWelcome to Gongyi Yuefeng Heavy Machinery Co., Ltd. official website.
Consulting hotline:139-3820-1626
Popular keywords:Wet rollerMagnetic separatorBall millCrusherDryer
location:Home > News > News

News

Operational essentials for wet mill maintenance personnel

DATE:2018-9-30 10:32:48 HITS:
Operational essentials for wet mill maintenance personnel

  How to maintain the wet mill after installation? The full name of the wet mill is a wet mill. As a large-scale mechanical equipment, if you do not pay attention to maintenance after installation, the maintenance cost will be higher once the equipment is repaired, and its service life will be reduced. Therefore, we use this equipment on a daily basis, we must pay attention to the daily maintenance work of the equipment, only the maintenance work is done, the service life of the equipment will be prolonged, and the maintenance cost is also saved. So, how should we maintain the equipment to make it extend its service life?
First, the maintenance of the bearing. The length of time the bearing of the machine is used is mainly related to the lubrication of the machine. Generally speaking, the lubrication of the bearing is mainly in the parts of the rotating bearing, the roller bearing, the gear, the movable bearing and the sliding plane. Before lubricating, it is necessary to ensure The lubrication needs to be cleaned, and the structure that needs to be lubricated is only guaranteed to be clean, so as to ensure that it can receive better lubrication.
Second, if the wheel is newly installed, it is prone to looseness, so equipment maintenance personnel should frequently check the tires frequently to avoid damage caused by looseness.
3. Always check the vulnerable parts of the machine. If it is found that the wear of the machine is high, replace the parts in time.
Fourth, often clean the plane of the chassis, if the chassis meets more dust, it will affect the operation of the machine, prone to serious accidents.
5. Pay special attention to the oil temperature of the bearing when checking whether the various parts of the machine are in normal operation. If the bearing oil temperature rises, immediately turn off the machine to check the cause of the oil temperature rise.
6. If there is an impact sound when the rotating gear is running, immediately turn off the machine for investigation. The normal operation of the wet mill depends on the usual maintenance work.
You can refer to the above points when performing maintenance on the equipment. Only when the maintenance work is done, the machine will work for you longer.
product center

Grinding equipment series

Crushing equipment series

Magnetic separation equipment series

Washing equipment series

Screening equipment series

Roasting and drying equipment series

Mineral processing auxiliary equipment series

Potash Feldspar Production Line Equipment Series

Cord detection line series

Wire flaw detection line equipment

Contact Us
HOTLINE:139-3820-1626

Contact: manager Xie

Mobile phone:13938201626

Mobile phone:13938410218

Fax:0371-64349001

address:Henan Gongyi private economy Pioneer Park (Kang Dian Jiao WAN)