The wet mill itself is made up of many different parts, and any part must be well corrected, so you must pay attention to its correction when installing this machine, then how should it be? To correct it? The basin is also to be calibrated. Generally, it is necessary to first lay five centimeters of sand inside, which is beneficial to ensure the horizontal position.
In addition to the correction in this respect, in addition to the requirements of the drum, it must be ensured that it can stand on the ground, let the gourd head pass through the middle of it, and the other end is fixed on the flange. The next step is to fix the bolts. At this time, because the disc has been well calibrated, no correction is required in terms of level, but on the bolts, be sure to tighten.
When it is working, it has a lot of power to transmit, so the big axis in the middle must pay attention to its tightness when it is installed, and only in this way, it can get good performance when it is working. A wet mill can not achieve a good job, mainly depends on whether it can meet the installation requirements when it is installed. It is very important in this respect, so it must be installed according to the installation requirements. Come in and operate.