location：Home > News > FAQ

FAQ

Oil mark and refueling system of wet mill reducer

DATE：2018-9-30 10:37:28　HITS：

When the oil quantity of the wet mill reaches a very low limit, the supply shortage will cause damage to the wet mill. Therefore, the staff should always check the oil level in the wet mill tank, and it is necessary to refuel when refueling. , to ensure that the machine can run normally. Now let's analyze what the oil mark and fueling system of the wet mill reducer is.

The wet mill reducer oil mark is mainly used to observe and control the gear oil level of the reducer, and keep the large and small gears working under the specified lubrication mode. Filling the lubricating oil should strictly control the oil level of the reducer according to the upper and lower limits of the oil mark. If the lubricating oil is added less, the lubricating effect will not be achieved, causing the dry pot to make the gear surface coke and the bearing damage, affecting the service life of the reducer; More injections will add additional force to the operation of the wet mill, increase the temperature of the reducer, and even damage the bearing and oil seal, affecting the normal operation of the equipment.

Therefore, in order to maintain the normal operation of the wet mill, it is necessary to timely maintain and maintain the equipment, and timely inspection work is essential.

PREV：How to solve the problem of blockage of wet mill materials

NEXT：Wet mill specifications and use